Double PET tape
| Adhesive： | S13 seriesAcrylic |
| Backing ： | PET film |
| Adhesive： | S13 seriesAcrylic |
| Release liner： | Release paper or release film |
| Description： |
High adhesion PET Double-sided tape is made of polyester
film Backing Double coated with a layer of high adhesion
Acrylic. Can meet the high adhesion needs of plastic, foam, and metal. |
| Adhesion： | > 1000 g/25mm |
| Total Thickness (withoutRelease liner)： | 0.025 mm ~ 0.05 mm (Custom) |
| Feature： |
■ 此款S13 series胶黏剂, Three 高性能(初期力, 黏着力, 保持力)表现稳定且优秀, 适用于一般通用贴合 ■ PET film刚性强挺度优, 有助于提高模切加工时的尺寸稳定性（可根据所需胶带Total thickness对Backing thickness进行选择） |
| Applications： |
■ 适用于一般通用贴合, 例如塑料件, 金属件, 铭板, etc ■ 屏幕边框与缓冲泡绵的贴合 ■ 电子产品内部件的绝缘, 黏合固定 |
| TY 对应品名： |
PD617, PD615, PD616 UL certified No. MH45156 |
| Adhesive： | Acrylic |
| Backing ： | PET film |
| Adhesive： | 网格纹面Acrylic |
| Release liner： | 网格Release paper 或 网格离型膜 |
| Description： |
网格胶面排气型PETDouble-sided tape是以PET film为 Backing , 一面涂布Acrylic, 另一面涂布网格胶. 适用于大面积黏贴或有高平整度要求黏贴. |
| Adhesion： | > 800 g/25mm |
| Total Thickness (withoutRelease liner)： | 0.055 mm ~ 0.15 mm (Custom) |
| Feature： |
■ 网格状胶面非常适合在大面积的粘接和贴合 ■ 此款 series主要在于网纹底材的选择, 涵盖: 网纹形状(方形/菱形/蛇纹), 网纹尺寸大小, 网纹深浅, 网纹底材(Release paper /离型膜) ■Mesh surface的设计, 具有优异的排气效果泡防止凸包使贴合更加平整 |
| Applications： |
■ 适用于大面积的贴合 ■ Applications于对平整度有极高要求的部位件贴合 ■ Applications于笔电上触控板/滑鼠板的贴合 ■ Applications于铭牌标牌贴合 ■ 电子产品内部件的绝缘Applications |
| TY 对应品名： | TY A298Y, PD617-Y, A298Y-2 |
| Adhesive： | Acrylic |
| Backing ： | Black seriesPET film |
| Adhesive： | Acrylic |
| Release liner： | Release paper or release film |
| Description： |
MaskingPETDouble-sided tape是以Black series聚酯薄膜 Backing , Double 面各涂布一层高AdhesionAcrylic 有良好的光Masking效果. |
| Adhesion： | > 800 g/25mm |
| Total Thickness (withoutRelease liner)： | 0.03 mm ~ 0.2 mm (Custom) |
| Feature： |
■此款 series主要在于原膜的设计，有效提升胶带整体对光的Masking性 ■Black原膜最薄Thickness达15um，仍保持优秀Masking性能 ■Black series薄膜可选择色系: 亮黑或Matte black ■Black原膜表面为绝缘 (表面电阻值≧10^10Ω) |
| Applications： |
■ Applications于光Masking或防止漏光, 例如电脑屏幕边框, 电脑键盘的背光模组 ■ 电线的缠绕固定 ■ 电子产品内部件的绝缘Applications |
| TY 对应品名： | A298B, PD617-100B, PD619-BDT |
| Adhesive： | Acrylic |
| Backing ： | Black印刷PET film |
| Adhesive： | Acrylic |
| Release liner： | Release paper or release film |
| Description： | MaskingPETDouble-sided tape是以Black印刷PET film为 Backing , Double 面各背上一层High adhesion性Acrylic. |
| Adhesion： | > 800 g/25mm |
| Total Thickness (withoutRelease liner)： | 0.03 mm ~ 0.2 mm (Custom) |
| Feature： |
■Matte blackMasking tape是以印刷黑膜搭配压力克胶; 低透光性和低反光; 印刷Color,
色泽等Custom ■ 印刷面抗指纹表现好 ■ 印刷面可以溶剂清洁 (特定溶剂, 如 95% Ethanol和95% toluene) ■ 印刷面绝缘 (表面电阻值≧10^10Ω) |
| Applications： |
■ 电线的缠绕固定 ■ 电子产品内部件的绝缘Applications |
| TY 对应品名： |
| Adhesive： | SR37 seriesAcrylic |
| Backing ： | PET film |
| Adhesive： | SR37 seriesAcrylic |
| Release liner： | Release paper or release film |
| Description： |
薄涂High adhesionPETDouble-sided tape是以超薄的PET film为 Backing , Double 面各涂布一层高AdhesionAcrylic. 非常适用于狭小的空间里需要High adhesion粘结的Applications. |
| Adhesion： | 400 ~ 1800 g/25mm |
| Total Thickness (withoutRelease liner)： | 0.01mm (Custom) |
| Feature： |
■ 此款SR37 series胶黏剂, 具备优良Three 高性能－初期力, 黏着力, 保持力 ■ 优秀耐温性能 可达120℃ ■ 优秀保持力 120℃ x 48hrs x 滑落<0.5mm ■ 优秀黏着力适用于薄涂高粘需求 |
| Applications： |
■ 适用于狭小空间或有Thickness限制的黏合Applications ■ 屏幕边框与缓冲泡绵的贴合 ■ Ultra-thinDouble-sided tapeApplications于石墨稀贴合 ■ 电子产品内部件的黏合固定 |
| TY 对应品名： | PD6720, PD640-DT |
| Adhesive： | High adhesionAcrylic |
| Backing ： | PET film |
| Adhesive： | low AdhesionAcrylic |
| Release liner： | Release paper or release film |
| Description： |
AB type型PETDouble-sided tape是以PET film为 Backing , 一面涂布High adhesionAcrylic, 另一面涂布low AdhesionAcrylic. 一面用于永久粘合, 另一面做制程上的转贴Applications. |
| Adhesion： | 客制 |
| Total Thickness (withoutRelease liner)： | 0.05 mm ~ 0.145 mm (Custom) |
| Feature： |
■ High adhesion着力及low Adhesion着力可根据需求进行调整 ■ 两面胶层做不同Applications（例如low Adhesion着力做转贴Applications High adhesion着力做贴合Applications） ■ 两面胶层做不同材质贴合 |
| Applications： |
■ 两面胶层做不同Applications（例如low Adhesion着力做转贴Applications High adhesion着力做贴合Applications） ■ 两面胶层做不同材质贴合 |
| TY 对应品名： | PD619, PD641, PD7745 |
| Adhesive： | Acrylic |
| Backing ： | PET film |
| Adhesive： | Silicone |
| Release liner： | Release paper or release film |
| Description： |
AB type PET Double-sided tape uses PET film as backing, one
side is coated with High adhesion Acrylic, and the other
side is coated with Silicone. Applications for pasting between two different materials. |
| Adhesion： | |
| Total Thickness (withoutRelease liner)： | 0.05 mm ~ 0.145 mm (Custom) |
| Feature： |
■Acrylic on one side and Silicone on the other side.
Applications are used for bonding of different materials
(for example, Acrylic is bonded to plastic parts, and
Silicone is bonded to silicon rubber materials) ■Silicone surface, with excellent initial strength and adhesion, can withstand high temperature of 120～250℃ (different series of silicones have different temperature resistance levels) ■ Acrylic can have good adhesion with plastic, foam, or metal, and the short-term temperature resistance can reach 120℃ |
| Applications： |
■Silicone surface is suitable for silicon rubber material
bonding, Acrylic surface is suitable for plastic or metal
material bonding ■Suitable for the bonding and fixing of remote control buttons, old mobile phone buttons, or other internal parts of electronic products ■Suitable for furniture feet |
| TY 对应品名： | TY PD617-SA, TY PD615-SA |
| Adhesive： | S04 seriesAcrylic |
| Backing ： | PET film |
| Adhesive： | S04 seriesAcrylic |
| Release liner： | Release paper or release film |
| Description： |
Heat resistant tape is based on PET film Backing and Double
side with a layer of high temperature and high Adhesion
Acrylic on the back. Good performance in high temperature environment (excellent high temperature retention). |
| Adhesion： | 1000 ~ 3000 g/25mm |
| Total Thickness (withoutRelease liner)： | |
| Feature： |
■ This S04 series adhesive has excellent high temperature
resistance and high temperature retention performance ■ Excellent temperature resistance performance up to 180℃ ■ Excellent high temperature retention 150℃ x 48hrs x sliding <1.0mm ■ Excellent static shear force: 100℃ x without any sliding 120℃ x sliding and falling <1.0mm ■ The adhesive is in a hard state, suitable for coating thick layers |
| Applications： |
■ Suitable for high temperature environment, such as
radiator ■ Electronic Insulation Applications |
| TY 对应品名： | PD618, PD617-6 (4c), PD615-7 (6c), PD620-B-A3, PD618-25B, PD617-75B |
